Let us consider a hydraulic circuit where one cylinder is required to apply a lesser force than the other as shown in Figure 6.20. Here cylinder B is required to apply a lesser force than cylinder A. This is accomplished as follows.
A pressure-reducing valve is placed just before cylinder B in the hydraulic circuit as shown. This arrangement allows flow to the cylinder, until the set pressure value on the valve is reached. At this point where the set pressure is reached, the valve shuts off, thereby preventing any further buildup of pressure. The fluid is bled to the tank through the drain valve passage resulting in the easing-off of the pressure, as a result of which the valve opens again. Finally a reduced modulated pressure equal to the valve results.